Deprecated: __autoload() is deprecated, use spl_autoload_register() instead in /usr/www/users/geysevwqed/_ac-core/_components/PHPMailer/PHPMailerAutoload.php on line 45 geysermagic

GeyserWise TSE

All GeyserWise products are supplied and distributed by GeyserMagic


Labeled - TSE

Note the small control box
compared to MAX

GeyserWise thermal cut-out sold
with the unit

Technical parameters

  • Main relay contact rating 30AMP (Max 4KW).
  • Operating voltage range 160V - 250V AC.
  • Temperature display range 0 - 99°C (“-5” when below -5°C “EA” when above 99°C).
  • High temperature warning above 84°C.
  • Temperature setting ranges 30 - 65°C (heating water electrically).
  • Heat failure - when increase at a rate of less than 4°C per hour.
  • Mechanical thermal cut-out at 90°C. Please note the cut-out temperature for systems expected to reach temperatures above this temperature.
  • Dry heat detection - empty cylinder.
  • Temperature tolerance ± 2%.
  • Temperature differential setting 1°C.
  • Switching differential 6°C.
  • Temperature probe failure detection for tank.
  • Temperature probe range for geyser is -30 to + 130°C.

GeyserWise TSE functionality

Use as a geyser timer

  • Clear display of water temperature, time, day, heating mode and malfunction conditions.
  • Auto or manual heating.
  • Easy temperature setting to your requirements (30 - 65°C) factory default is 55°C.
  • Four different temperature settings.
  • Daily programmable timer with four time settings.
  • Error conditions alert by warning code E2 to E5.
  • Mechanical thermal cut-out at 90°C. Please note the cut-out temperature for systems expected to reach temperatures above this temperature.

Use as timer on a thermosyphon solar system

  • Clear display of water temperature, time, day, heating mode and malfunction conditions on solar system and geyser.
  • Auto or manual heating.
  • Easy temperature setting to your requirements (30 - 65° C) factory default is 55°C.
  • Four different temperature settings.
  • Daily programmable timer with four time settings.
  • Error conditions alert by warning code E2 to E5.
  • Mechanical thermal cut-out at 90°C. Please note the cut-out temperature for systems expected to reach temperatures above this temperature.
  • Operating voltage 230VAC / 50HZ

share this with someone

Menu